Millerperformance Cooling Fan install

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CasanovaE30
    Noobie
    • Mar 2010
    • 30

    #1

    Millerperformance Cooling Fan install

    Hey guys I'm installing my fan soon and I'm looking at the wiring harness and I understand 2 out of the 3 things on the wiring harness but I need to know where this part installs at. In the picture with the question mark over is it the one I need to know where is goes. Can you guys help me?

    Click image for larger version

Name:	wireharness.jpg
Views:	1
Size:	100.5 KB
ID:	7221677Click image for larger version

Name:	IMG_1001.jpg
Views:	1
Size:	48.4 KB
ID:	7221678
    Put that in your pipe and smoke it!
  • brody
    Grease Monkey
    • Jul 2009
    • 334

    #2
    Should have been a letter in the box thanking you for the purchase, and directing you to go to our website to download the manual.

    Comment

    • CasanovaE30
      Noobie
      • Mar 2010
      • 30

      #3
      Ok I figured out, but is it bad to unplug the Charcoal Canister?
      Put that in your pipe and smoke it!

      Comment

      • CasanovaE30
        Noobie
        • Mar 2010
        • 30

        #4
        Hey Brody, I'm having idling issues since I installed the fan. What would cause this?
        Put that in your pipe and smoke it!

        Comment

        • SkiFree
          R3VLimited
          • Jun 2011
          • 2766

          #5
          Couldn't you just call them?
          ADAMS Autosport

          Comment

          • brody
            Grease Monkey
            • Jul 2009
            • 334

            #6
            What is the issue? High idle?

            Comment

            • CasanovaE30
              Noobie
              • Mar 2010
              • 30

              #7
              Low idle
              Put that in your pipe and smoke it!

              Comment

              • handysmurf59
                Grease Monkey
                • Dec 2007
                • 335

                #8
                Did you unplug the charcoal canister? Vacuum leak?????
                sigpic
                "But the way it deals with bumps and heaves makes you think the shocks are filled with unicorn farts and pixie tears."

                Comment

                • handysmurf59
                  Grease Monkey
                  • Dec 2007
                  • 335

                  #9
                  BTW, some install photos would be great. I just installed their PSIK and it is the bomb. So now I am thinking about the fan also.
                  sigpic
                  "But the way it deals with bumps and heaves makes you think the shocks are filled with unicorn farts and pixie tears."

                  Comment

                  • CasanovaE30
                    Noobie
                    • Mar 2010
                    • 30

                    #10
                    So I will write a list of the work I've done to my car in the pass few weeks to prepare for some long hauls soon.

                    Replaced fuel injectors, which I did take off the Intake Manifold and cleaned it really nice.

                    Cleaned my Throttle Body and replaced the Gasket

                    After replacing the above my car still ran normal and great.

                    Bought a New Crankcase Breather Hose, because mine was old and nasty.

                    Bought the Miller Performance Cooling Fan and Installed as directed.

                    Things that I have discovered by pinching vacuum lines to see if it affect the idle. I pinched the Charcoal canister and there was no change in the Idle, but when I pinched the Crankcase breather hose my idle changed and felt like it made the idle normal. I was thinking that maybe something with the hose is wrong and is causing this or the car is compensating for something that is leaking.

                    I was also thinking that maybe the new ECU chip was coded possibly wrong, just to throw that out there.

                    Let me know your thoughts.
                    Put that in your pipe and smoke it!

                    Comment

                    • CasanovaE30
                      Noobie
                      • Mar 2010
                      • 30

                      #11
                      So I will write a list of the work I've done to my car in the pass few weeks to prepare for some long hauls soon.

                      Replaced fuel injectors, which I did take off the Intake Manifold and cleaned it really nice.

                      Cleaned my Throttle Body and replaced the Gasket

                      After replacing the above my car still ran normal and great.

                      Bought a New Crankcase Breather Hose, because mine was old and nasty.

                      Bought the Miller Performance Cooling Fan and Installed as directed.

                      Things that I have discovered by pinching vacuum lines to see if it affect the idle. I pinched the Charcoal canister and there was no change in the Idle, but when I pinched the Crankcase breather hose my idle changed and felt like it made the idle normal. I was thinking that maybe something with the hose is wrong and is causing this or the car is compensating for something that is leaking.

                      I was also thinking that maybe the new ECU chip was coded possibly wrong, just to throw that out there.

                      Let me know your thoughts.
                      Put that in your pipe and smoke it!

                      Comment

                      • CasanovaE30
                        Noobie
                        • Mar 2010
                        • 30

                        #12
                        Another thing I forgot to mention is Engine light comes on when I idle for longer then 5 minutes or so.
                        Put that in your pipe and smoke it!

                        Comment

                        Working...