The fap99 website says that my 1988 325i gets 2 crank position sensors. Does that make sense?
-
"If the sky were to fall tomorrow, the tall would die first."
-Dr. Paul Forrester
Do I LOOK like I need a psychological evaluation??? -
If you have a CPS on the front pulley, there is only one. If you have sensors in the trans bellhousing there are two ( speed and reference)Lorin
Originally posted by slammin.e28 -
Fap99 is bueno. 325e had 2 CPS in the bellhousing, 325i had 1 on the front of the engine. If you have any worries that you will get the wrong one, just call Tim (the contact # on the site), he is an E30 guy and will make sure you get the right one.Comment
-
Your car only has a single CPS mounted on the front of the engine. Only ETA cars (through 8/87) had two timing sensors mounted in the transmission bell housing.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, ALComment
-
Last edited by funcrew; 07-27-2011, 10:12 PM."If the sky were to fall tomorrow, the tall would die first."
-Dr. Paul Forrester
Do I LOOK like I need a psychological evaluation???Comment
Comment