injector removal, wrong place to post but its a quick question

[MattAvino]

Newbish question - can I remove fuel rail/itnjectors without removing intake mani?
just looking for a quick answer

[jaywood]

Yes, on my late model m20 I just did it

It takes about 10 minutes to get off

[MattAvino]

Ok thanks a lot!

[der affe]

Yes, if you have ITBs

[Teaguer]

Newbish question - can I remove fuel rail/itnjectors without removing intake mani?
just looking for a quick answer

No.

Yes, on my late model m20 I just did it

It takes about 10 minutes to get off

Don't know about that!

Ok thanks a lot!

Don't thank him yet.

Yes, if you have ITBs

Word.


:D

[MattAvino]

Oh boy...

[jaywood]

I just did this 2 days ago for the 2nd time

I didn't remove the intake mani

[MattAvino]

M20: troll engine

[jaywood]

There is no need to remove the intake mani to get the injectors out. That doesn't make any sense. There's enough room to pop 2 injectors off of the fuel rail (closest to the firewall) and slide the rest of the injectors out as a hole (injectors + fuel rail)

[JubJub]

There is no need to remove the intake mani to get the injectors out. That doesn't make any sense. There's enough room to pop 2 injectors off of the fuel rail (closest to the firewall) and slide the rest of the injectors out as a hole (injectors + fuel rail)

+1 you dont HAVE to take out the intake mani to get this out...

[jaywood]

Unless you need a new intake manifold gasket, don't remove it

[Joe G]

It takes about 10 minutes to get off

thats what she said.

[brutus87]

hahaha

[TurboJake]

I've taken them off without taking out the mani. It's a PITA to get the injector clips. But it can be done.

[MR 325]

I have done it many times, no big deal to change injectors without removing the intake.