Announcement

Collapse
No announcement yet.

Temp Sending Unit Motronic 1.3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Temp Sending Unit Motronic 1.3

    Can somebody explain: I got new sensors for cooling system. Is the temp sending unit supposed to be Open or Closed when cold ( below 86F)?? I checked continuity of the sender and it shows some ohms. I tested the old sensor after i drove it just about operating temp and it shows continuity also. Manufacturer of sensor FAE




    #2
    Both temp sensors are negative coefficient types. Meaning that they have a higher resistance cold than when hot. So yes they will have resistance at room temperature.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      Thanx for the info.

      Comment

      Working...
      X