Ebay chip. (not a question thread)

[Exodus_2pt0]

You don't listen do you?

[Chuckcruzin1986]

Talk talk talk

You said "I don't care if YOU get mad, because even if this happens in 6 months, it will be on the forum permanently. So plenty of other people will see it. If anyone wants to beat me to it, by all means I would love to see the results myself "

I am not mad, but why post something you are not capable of doing and go on and on for months with excuses.

Ok, sorry, so you got attention, my mistake.

I forgot, we are not looking for results, just talk

Chuck

[Northern]

Come on the forum, you are going to get it done. You are the man. You will end all the questions once and for all with the final answer.

Talk, talk and more talk.

You need to go back to school and learn how to get things done and follow up with your promises.

Where I come from we fire guys like you.

Chuck

Where I come from, you can't fire someone from an internet forum.

[redsubdivisions]

Come on the forum, you are going to get it done. You are the man. You will end all the questions once and for all with the final answer.

Talk, talk and more talk.

You need to go back to school and learn how to get things done and follow up with your promises.

Where I come from we fire guys like you.

Chuck

Wow. It's a forum, guy. Not a newspaper article. Calm down and go back to the GM factory and make another overpriced Buick.

[Exodus_2pt0]

Just ordered this.

http://www.ebay.com/itm/24HP-chip-BMW-E30-325i-325is-325ic-325ix-ecu-380-173-/270931157758?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f14c162fe&vxp=mtr#ht_845wt_1270

I read some good things about this guy so I decided what the hell, its $30 shipped. He claims that 17-19lb injectors are required, so I'm heading off to Crazy Rays to grab some M50 injectors tomorrow.

I will try to arrange some Dyno time. I'll run a baseline pull, then install the chip and injectors for a 2nd pull.

My plan is to put this baby to rest, and give some real results. Same day dyno runs too to eliminate variables.

Also, before someone says "24 horsepower haha". I just want to point out that I really don't care about how much horsepower is claimed, if I get 5 horsepower at the wheels, that's fine by me. I'm not doing this in an attempt to make my M20 a race engine, i'm doing it because it's cheap. :)

Yea it will be more than 1 pull each as we'll have the dyno for an hour. One of the local shops has offered us some inter-shop cooperation where they will train us on their dyno and let us use it for a great discount price. So I'm combining a learning opportunity with some research for the forum. :D

It was actually your post that made me decide to go with this guys chip.

http://www.e30tech.com/forum/showthread.php?t=98752

I have a few cars to work on this morning, hopefully i'll be able to close the shop early and head to the yard.

Well good news. The seller is great on communication, we were able to work out an awesome deal.

Total spent for 19lb injectors (already rebuilt) and the chip = $75ish including shipping. So, if It squeezes out a few ponies on paper it should be well worth the cost.

Package has been shipped, still waiting.

Got mine too!

So I have had a few hurdles to jump today. I decided to go ahead and install the 19lb injectors first. Before you give me crap, remember this is about the horsepower gain from the CHIP only, so it makes sense to have the injectors installed for the baseline. Plus I didn't want to be taking up precious dyno time installing them.

Got the injectors in, I was a little concerned when I found that 2 came out missing their caps. After some careful consideration and inspection of the injectors themselves we came to the conclusion that they had been missing for a while. Nevertheless, we ran one of those bolt grabbers down into the intake to check for any loose items, everything checked out. After installing the new injectors we disconnected the coil pack for a couple turn overs to check for noise, all seemed well so I started it up.

I recommend 19lb injectors to anyone without a tune even. Idles smoother, and just plain runs better.

Then came the chip install (don't worry, we are working on getting dyno time, at which point the chip will be swapped back out for before and after runs) I removed the ECM to find a 153 in there.

That's OK, I informed my business partner that his Vert' that is just sitting will be a donor car for now. Swapped his 173 ECM into mine, and did a test start. Ran great. Then I installed the chip, filled her up with some 93 octane and went for a drive.

Honestly, I can't feel any difference other than a smoooooooth power band and the 7k rev limiter will be nice for auto-X.

lucky for us, the butt dyno won't be the only test to see for sure. We are hoping to get the car on the dyno this week or early next. Stay tuned for real numbers!

Sorry for the delay guys.

The shop we take our cars to for the dyno has had theirs tied up. The owner just finished his 6.2 ls swap into a Foxbody. It may take longer than expected.

Yea I've put a few hundred miles on it. With the shop just starting out we don't have a ton of extra cash. Should be able to have something at the end of the month after the bills are paid.

Stay tuned, I apologize for the delay.

Soon, we either will, or won't. Dyno has been put on the back burner but I will post up as soon as it happens. I haven't forgotten!

I apologize guys, the car is no longer in the shape to be put on the dyno safely. 4th gear is gone and the driveshaft is noisy as hell. I won't be fixing it either, as I am about ready to drop the lsx in.

However, before all that happened, the car ran better with the chip/injectors. I used to be able to feel a few dips in the power curve on the stock injectors/tune. Now, it is smooth sailing all the way to 7k.

I can't say I noticed anything power wise, just a smoother, more enjoyable drive. However, for the price paid, it's well worth it.

HOWEVER!

We do have a vert that we WILL be putting on the dyno. It will be a while still, as we have to do a 5 speed swap on it first. We do have all the parts, so eventually, this thread will provide the goods.

I'll just direct anyone who wants to call me an asshole to my posts above.

Come on the forum, you are going to get it done. You are the man. You will end all the questions once and for all with the final answer.

Talk, talk and more talk.

You need to go back to school and learn how to get things done and follow up with your promises.

Where I come from we fire guys like you.

Chuck

Tell you what buddy, send me enough money to pay for a new transmission, driveshaft, a new ring set so I can take care of my compression issue on cyl. #3, and a few hours of dyno time.

First post, I said that I was doing all of this because it wouldn't cost me too much money. That changed, so the project was dropped.

As I said before, this project is no longer in the cards right now. No need to get your pitchfork out. IF the cards fall back into place, then I will finish it.

I don't care if YOU get mad, because even if this happens in 6 months, it will be on the forum permanently. So plenty of other people will see it. If anyone wants to beat me to it, by all means I would love to see the results myself.

To all of you haters, :finger:

[Chuckcruzin1986]

This is so typical. Big mouths

I've gotten plenty done, just not on this project. Sorry I couldn't meet your deadline, sir.

Whats the rush anyway? Everything I do is on a strict budget. I enjoy playing without paying, therefor I take my time.

Come on the forum, you are going to get it done. You are the man. You will end all the questions once and for all with the final answer.

Talk, talk and more talk.

You need to go back to school and learn how to get things done and follow up with your promises.

Where I come from we fire guys like you.

Chuck

[Vivek]

Any updates?

[ApexMotorsports]

Well once I get the Zinno rebuilt I plan on doing dyno pulls. If someone wants a deposit or whatever I would gladly test various chips in 173 ecu's. (still at least 1 month out however)

[black88inmd]

I'm pretty interested in how that chip does. I'm actually up in Damascus as well. Where is your shop at?

[Exodus_2pt0]

Ahaha...I'll probably own the blue car in my sig with an m20 swap in it and an ebay chip before that happens, based on the rate that you've gotten everything else done :rofl:.

I've gotten plenty done, just not on this project. Sorry I couldn't meet your deadline, sir.

Whats the rush anyway? Everything I do is on a strict budget. I enjoy playing without paying, therefor I take my time.

[bernzpeed]

I bought an ebay chip for the same price. It works better than the BMP that I tried. Rev limiter was definitely raised. My auto tranny can shift at 6000 rpm now. Have driven my auto up to 7000rpm and top speed at 140 mph, fuel economy was 23.4mpg from Mountain View to Walnut Creek. This is what the stock E30 injectors I am running right now. Fuel economy at 70mph from Hayward to Walnut Creek is 29.7mpg.

I have the M50 injectors to swap over and I can't wait what it unleashes.

[george graves]

I plan on picking up the M30 91 octane chip from the same seller.

[Vivek]

Ahaha...I'll probably own the blue car in my sig with an m20 swap in it and an ebay chip before that happens, based on the rate that you've gotten everything else done :rofl:.

[Exodus_2pt0]

HOWEVER!

We do have a vert that we WILL be putting on the dyno. It will be a while still, as we have to do a 5 speed swap on it first. We do have all the parts, so eventually, this thread will provide the goods.

[Exodus_2pt0]

I apologize guys, the car is no longer in the shape to be put on the dyno safely. 4th gear is gone and the driveshaft is noisy as hell. I won't be fixing it either, as I am about ready to drop the lsx in.

However, before all that happened, the car ran better with the chip/injectors. I used to be able to feel a few dips in the power curve on the stock injectors/tune. Now, it is smooth sailing all the way to 7k.

I can't say I noticed anything power wise, just a smoother, more enjoyable drive. However, for the price paid, it's well worth it.