which headgasket is it?

[mr.vang]

so on realoem, there are two different headgasket so which one to buy? it for an eta btw.

http://realoem.com/bmw/showparts.do?...10&hg=11&fg=15

[MR 325]

Pretty simple. The first part number is stock spec and the second part number is a thicker gasket to accommodate for a head that's been machined a few times. Nine out of ten times the stock gasket is fine.

[mr.vang]

Pretty simple. The first part number is stock spec and the second part number is a thicker gasket to accommodate for a head that's been machined a few times. Nine out of ten times the stock gasket is fine.

thanks, i never knew that. :up: