If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pretty simple. The first part number is stock spec and the second part number is a thicker gasket to accommodate for a head that's been machined a few times. Nine out of ten times the stock gasket is fine.
Pretty simple. The first part number is stock spec and the second part number is a thicker gasket to accommodate for a head that's been machined a few times. Nine out of ten times the stock gasket is fine.
Comment