2.7i dynos!

[mikeb23ft]

Need to see some 2.7i swap dynos! Post 'em if you got em, along with the setup.

Specifically if someone had a Super Eta + entire I top end + TMS chip swap that's what I'd be interested in.

[Gary Horneck]

I just posted my results last week.

http://www.r3vlimited.com/board/showthread.php?t=251796

[mikeb23ft]

I just posted my results last week.

http://www.r3vlimited.com/board/showthread.php?t=251796

Just found that thread, looks great. I would think that an 885 head with Supereta pistons would yield even better results? I might even be able to scrape the budget together for some mild headwork.

[JA1991]

I'll have one in probably the next two months. I'll be buying a head from Mr.E. So my build should be something like, port, polish, 3 angle valve job, turbo cam, (to get ready for a turbo) megasquirt, and possibly e85 and bigger injectors. As well as all new seals, gaskets, mls head gasket, arp head studs, new piston rings, basically a whole rebuild.

[mikeb23ft]

I'm not trying to get advanced. Just trying to slap a top end onto a bottom end and boogie.

[camip]

I'm not trying to get advanced. Just trying to slap a top end onto a bottom end and boogie.

Word me too.

[Gary Horneck]

Slap a top end on it, and go. That's what I did.

[JA1991]

Too the guys who have done a head swap do you think it performs as good or better than an I/IS?

[acolella76]

This is UNTUNED, stock 2.7 eta bottom end with 885 head and 272˚ cam.

Too the guys who have done a head swap do you think it performs as good or better than an I/IS?

Absolutely. I had the 2.7 before, I have a stock B25 now. The 2.7 was in my opinion a lot stronger than the 2.5, and there's no doubt in my mind that if I had gotten the thing tuned properly it would have been in M50 territory.

[Bretts85E30]

That's giving me a lot of hope doin it to my eta in the next couple months just not sure bout the harness part yet I need a spare car for that portion cuz of my work schedule I want the harness right the first time

[acolella76]

The harness part is super easy, but don't be afraid to ask for help. What year is your car?

[JA1991]

awesome i cant wait