my preasure light flickering on?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • timninja
    Grease Monkey
    • Feb 2011
    • 302

    #1

    my preasure light flickering on?

    driving to the store the other day and my oil pressure light started flickering at 4k,so I stopped,checked my oil it was 1/2 a qrt low filled it back to level with 5w-40 and and now it ls always on or off,temp doesn't seem to change these issues.how should go about troubleshooting this?
  • jlevie
    R3V OG
    • Nov 2006
    • 13530

    #2
    The first step would be to find out what the oil pressure really is after changing the filter. That is done by temporarily replacing pressure switch with gauge.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment

    • timninja
      Grease Monkey
      • Feb 2011
      • 302

      #3
      Where is the pressure switch?

      Comment

      • camip
        E30 Fanatic
        • Nov 2011
        • 1253

        #4
        This happened to me check if the wire is off the switch before getting a pressure tester etc.

        Comment

        • timninja
          Grease Monkey
          • Feb 2011
          • 302

          #5
          wait is it a vacume hose to a solenoid switch down under my alternator in/on the oil pan?

          Comment

          • timninja
            Grease Monkey
            • Feb 2011
            • 302

            #6
            wait its the only sensor in the oil pan,then it is nvm,stupid question answered,btw jlevie I wanted to thank you,you've helped me repair just about every issue ive had with my e30 so far.

            Comment

            • SmokeE30
              E30 Mastermind
              • Jun 2009
              • 1730

              #7
              oil presure sensor is on the passenger side of the block single wire sensor down below the oil filter area, not on the pan itself, thats the oil level sender
              Shawn @ Bimmerbuddies
              Bimmerbuddies LLC
              717-388-1256
              2971a Roundtop Rd, Middletown PA 17057
              bimmerbuddiesllc@gmail.com

              Comment

              • timninja
                Grease Monkey
                • Feb 2011
                • 302

                #8
                Wait,I thought that was for the upper check oil level light?
                In that case,i have mine wire nutted off because the wire broke and exposed.
                Hmm,thanks smoke!

                Comment

                • SmokeE30
                  E30 Mastermind
                  • Jun 2009
                  • 1730

                  #9
                  yea the level sender for the check light is on the pan itself
                  Shawn @ Bimmerbuddies
                  Bimmerbuddies LLC
                  717-388-1256
                  2971a Roundtop Rd, Middletown PA 17057
                  bimmerbuddiesllc@gmail.com

                  Comment

                  • timninja
                    Grease Monkey
                    • Feb 2011
                    • 302

                    #10
                    Yeah I recently rebuilt my injectors and while doing that i broke that wire again and it was grounding on my intake,thanks man!

                    Comment

                    Working...