does anyone no where i can get a fuel rail adapter for the m20 fuel rail. i cant find one please help thanks =]
-
-
On both sides of the rail, it's an 8mm hose onto a barbed fitting with hose clamp. Make sure to get fuel injection hose on the inlet side, to handle the pressure. If you're trying to patch in to hook up for a fuel gauge, then an 8mm T fitting would be what you'd want. Eta cars already have a T fitting, running to the cold start injector. This is all assuming, of course, that you're running a stock M20 fuel rail. If you aren't, then we'll need pictures of the fittings, plus a ruler or something next to them for scale. -
Can you clarify what you mean by fuel rail adapter?Comment
-
You really want to use FI rated hose on the return line as well since non rated hose has issues with ethanol breaking it down.Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
https://www.r3vlimited.com/board/sho...86#post4944786
Alice the Time Capsule
http://www.r3vlimited.com/board/showthread.php?t=360504
87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220Comment
-
sorry guys i meant to run an aftermarket fuel pressure regulator lol i need an adapter to place where the stock regulator goes. =]Comment
-
Ireland Engineering sells them. Not sure if it's listed on their site but give them a call.Comment
Comment