Extremely loud ticking after head rebuild

[IronFreak]

Geez im sorry man the iPhone wont allow me to search on here for whatever strange reason. The search drop box wouldnt let me search anything. Now i have the link thanks ak-

My phone is the same way and I have an android.

[-bimmerboy-]

You have GOT TO BE KIDDING ME?

Geez im sorry man the iPhone wont allow me to search on here for whatever strange reason. The search drop box wouldnt let me search anything. Now i have the link thanks ak-

[MR 325]

So who installed the rocker shafts?

Why is there no oil coming out of the oil tube?

Why is oil seeping out of the headgasket if the head was just installed?

[-bimmerboy-]

hope you don't have piston/valve contact.

No i know its not that, its not really a metal clanging sound

[-bimmerboy-]

I already went on youtube to see how to do it. My buddy did the valve adjustment i just asked. So what else could this be if the valves half already been taken care of?

[-bimmerboy-]

is oil coming out from the spray bar on top of camshaft?

No but there is oil seeping out of the back left corner of the bottom of the head

[jlevie]

Were both dowels in place when the head was re-installed? And have you double checked cam timing?

[nando]

hope you don't have piston/valve contact.

[bernzpeed]

time for a valve adjustment...
go on youtube and you'll find tons of diy.
good luck...

[MR 325]

How?

You have GOT TO BE KIDDING ME?

[liquidgroove]

is oil coming out from the spray bar on top of camshaft?

[ak-]

How?

Like this http://www.r3vlimited.com/board/m20valveadjust.php

[-bimmerboy-]

Adjust your valvitos to spec

How?

[ak-]

Adjust your valvitos to spec

[-bimmerboy-]

Okay so i just got done with a full head rebuild, new Schrick 272 cam, hd rockers, new valve springs, cleaned up/ polished valves. Got the car running yesterday and now im getting a SUPER loud ticking coming from either the valvetrain or the the new injectors. Its way louder than the usual "e30 tick" and its exaggerated when i give it gas. Please help.