I replaced my FPR (since I was getting lean AFRs) with an IE adjustable one and set it to 43psi (~3-bar). My AFRs were still lean and now their is fuel bubbling out of the hot-side of my turbo. Not sure what could be issue...spark-plugs, injectors, etc. AFRs is reading 16:1 on idle and sometimes it doesn't read. Any thoughts will be greatly appreciated.
Specs:
Miller MAF/War turbo tuning
42lbs injectors,
t28 Garret
BOV
FMIC
3"DP
Adjustable FPR
Specs:
Miller MAF/War turbo tuning
42lbs injectors,
t28 Garret
BOV
FMIC
3"DP
Adjustable FPR
Comment