Smog fail help

[uhhrace]

Bought a 1986 325es this weekend and I'm trying to get it registered and on the road. I just failed the emissions test, here are my numbers

So I've got a high NOx reading, and I also failed the fuel EVAP test. I've read that the engine running lean can cause high NOx readings, so I'm gonna start replacing vacuum lines first. Is there a way to test that the O2 sensor is reading correctly? Any advice from someone who's had these problems before? Thanks in advance.

[Best_name_available]

1.Vacuum lines
2.O2 sensor
3.Make sure ignition is good
4.Sea foam treatment

My car failed the sniffer so I did all the things above and passed without a catalytic converter.

[htx_e30]

Damn.. So glad I live in a state now where I paid $7 for a 'classic car' inspection and just did a safety check and passed. Had this same nightmare before and did most of what member above me said & fixed the problem. Good luck!


Sent from my iPhone using Tapatalk

[abit]

just pour e85 fuel in your fuel tank and try again :devil: