Announcement

Collapse
No announcement yet.

Using 22lb injectors at 2.5 bar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Using 22lb injectors at 2.5 bar

    A few of my stock injectors are bad above 17ohms. Can I use 22lb injectors at 2.5 bars or even lower at 2 bars since I have an abjustable fpr.

    #2
    it would technically work, but the fuel will not atomize as well at lower pressures. That's why newer port injected cars run at 5 bar instead of 2.5-3.

    if it's temporary while you get proper injectors it could work though.
    Build thread

    Bimmerlabs

    Comment

    Working...
    X