Incessant coolant light, tested everything, any tips?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sail Boat
    Advanced Member
    • Oct 2016
    • 143

    #1

    Incessant coolant light, tested everything, any tips?

    Hi all,

    I've been trying to get my coolant light to shut off, but it just doesn't want to.

    First, I checked that the coolant level was correct. That wasn't the issue.

    I installed a new coolant level sensor, which was fully functional before I installed it. That didn't solve the problem.

    I checked the pigtail connector for power, which read 12 Volts on my multimeter, that wasn't the issue.

    I checked the coolant level sensor for continuity, which it has, so that isn't the issue.


    What do you all think I should do?

    Thanks!
    1991 325i 4 dr Euro Spec, 5 Speed, 4.10 LSD, Slicktop
  • Kershaw
    R3V OG
    • Feb 2010
    • 11822

    #2
    Pull the cluster and remove the bulb.
    AWD > RWD

    Comment

    • Sail Boat
      Advanced Member
      • Oct 2016
      • 143

      #3
      Originally posted by Kershaw
      Pull the cluster and remove the bulb.
      Actually, that's a good idea...

      EDIT: Maybe not. The "CHECK" light will flash every start.
      Last edited by Sail Boat; 02-02-2017, 11:56 AM.
      1991 325i 4 dr Euro Spec, 5 Speed, 4.10 LSD, Slicktop

      Comment

      Working...