dropping my Oil Pan got a question

[lti_57]

I have the car up got all the stuff un bolted except for those dang funky bolts coming from the tranny to that cover over the back side of Oil Pan what heck size is that and what socket do i need
at work but will get pics if need be
thanks in advance

[agent]

Post your topic in the correct forum PLEASE, it is very frustrating to the moderators to have to constantly rearrange topics. Technical questions do not belong in General Discussion. Get it? This helps keep R3V nice and organized so others can find what they are looking for.

[MrBurgundy]

E10 or E12


Sent from my iPhone using Tapatalk

[MrBurgundy]

forgot to mention you can use a 12 point socket (IIRC) if you dont have any "E" series tools.

[lti_57]

forgot to mention you can use a 12 point socket (IIRC) if you dont have any "E" series tools.

Ok great thanks I have not heard of them before
appreciate the help

[Echo30V]

Mine were E10s. However be very careful when you undo them, I, of course, stripped one using the 12 point socket. I stopped and bought a set of the E-Torx sockets and all went well.

[lti_57]

My apologizes I had now clue there was a technical forum never needed any help.
I am usually in the off topic forum looking at
" this is hot chicks"