Hay R3V, need your opinion on Valves

[StereoInstaller1]

How do you know they aren't?

If 2 of the valves heat-treat has failed, it only makes sense that the others are going.

ASS-u-ming that it was heat treat failure. I say it was a stiff rocker shaft issue...otherwise, it would have obvious damage on at least one of the other valves, instead of all looking perfect except for the two valves we had a hell of a time getting the rockers off.

The two that the rockers would not rotate easily on...

[dark89e30]

How do you know they aren't?

If 2 of the valves heat-treat has failed, it only makes sense that the others are going.

Not a bit. I'd put money on the reason for the failure being incorrect valve lash. Though it still could be a seized rocker bearing on the shaft... The chances of a broken rocker ruining all of the valves are slim to none. Why do you post on stuff like this when you don't know what the F you're talking about?

[erik325i]

Make sure to replace your headbolts too. You should not be running the old hex style headbolts.

-Erik

[StereoInstaller1]

Make sure to replace your headbolts too. You should not be running the old hex style headbolts.

-Erik

Yeah, I told Colby he needed to do this among other things.

Not my car, only my worry if I have to work on it again!