Announcement

Collapse
No announcement yet.

Diagnostic connector quick question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Diagnostic connector quick question

    On the 89 325i, with the 20 pin data/diagnostic connector, what are the two cables plugged to the bottom of it?
    Youtube channel is up!-->According2Valentine

    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
    If lucky, the E36 will die peacefully, in its natural habitat, and be given the prestigious honor of donating its parts to an E30
    Originally posted by J3M93
    This guy delivers, you are a boss

    #2
    bump
    Youtube channel is up!-->According2Valentine

    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
    If lucky, the E36 will die peacefully, in its natural habitat, and be given the prestigious honor of donating its parts to an E30
    Originally posted by J3M93
    This guy delivers, you are a boss

    Comment


      #3
      The two three pin connectors? Crank position sensor and Cyl ID sensor.
      -Dave
      2003 Lincoln Towncar | 1992 BMW 325iC | 1968 Cadillac Deville

      Need some help figuring out the ETM?

      Comment


        #4

        those two...
        Youtube channel is up!-->According2Valentine

        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
        If lucky, the E36 will die peacefully, in its natural habitat, and be given the prestigious honor of donating its parts to an E30
        Originally posted by J3M93
        This guy delivers, you are a boss

        Comment


          #5
          VR sensor(on front of the engine), and Pulse sensor(on #6 plug wire)
          85 325e 2.7 ITB'd stroker

          Comment


            #6
            so the Pulse sensor is the one with the metal clip(lower one on pic)?
            Youtube channel is up!-->According2Valentine

            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
            If lucky, the E36 will die peacefully, in its natural habitat, and be given the prestigious honor of donating its parts to an E30
            Originally posted by J3M93
            This guy delivers, you are a boss

            Comment


              #7
              They both have metal clips.....sigh......



              Its not that hard to follow it over to the vr sensor, or the cyl sensor

              Comment


                #8
                That and after they have been "played with", they can be switched. Follow the wires from the side of the connector under the plug (the side not visible in your picture) to either the CKP or ID sensor.
                -Dave
                2003 Lincoln Towncar | 1992 BMW 325iC | 1968 Cadillac Deville

                Need some help figuring out the ETM?

                Comment

                Working...
                X