Redline BMW's M20 rocker arms?

[z31maniac]

There web site says these are an improved OE design by BMW, are these able to take an increased Rev limit?

They also sell a locking kit for the M20 rocker arms that is supposed to help stabilize them, I'm assuming so they can take increased RPM's.

Anyone know anything about these?

[nando]

who is redline?

[StereoInstaller1]

who is redline?

X2, linkie, please!

[z31maniac]

http://www.redline-racing.com/redliner.htm

GRM magazine uses them for alot of stuff.

[nando]

the locks are pretty cool - but they're just selling OEM rockers you can get anywhere. have them x-rayed, smooth off the casting marks and shot peened , they'll be plenty strong for way less than billet.

[z31maniac]

7k RPM strong?

I'm going to do a compression test on my motor soon and if the bottom end is as strong as I think it is, I was thinking about just putting a fresh top end in the car some light head work and a cam.

[nando]

new rockers are fine to 7k, few people are going to have the cam required to make power up there anyway.

[my73bimmer]

I used to take my 2002Tii to redline. They are very close to where I live (5 miles away). The owner name is Rennie and they specialize in BMW's. They also fix a lot of racing bmw's. Try to contact Rennie. He has a lot of knowledge of all these cars. Good luck..

[z31maniac]

^I've emailed him a few times over the last week to no avail.

[my73bimmer]

^I've emailed him a few times over the last week to no avail.

I don't think he is much of a computer guy but he is good with cars. I would recommend you to give him a call better. ;)