Turbo build, need some advice

[StreetRacerS360]

I am planning to start building my car for boost, i am hoping to get around 600whp. What are some good valvetrain parts, pistons, connection rods, and a crank shaft if anyone even makes one? Is there anything other parts i should consider getting?

Thanks

[Jbpka06]

you would be able to make that power more easily with DOHC, swap in an m50 or s50 and then boost it, 600 wheel is quite ridiculous.

check out e30tech

[StreetRacerS360]

i was on there the other day i saw one E30 i think with around 500hp. i dont really want to do a engine swap right now. what would you say a resonable amount of whp would be?

[E30Idea]

300-400 on a kick ass tune/ built motor/ on race gas with a meth injection would be safe, and reasonable.....LOL

[StreetRacerS360]

dont really want to use meth injection lol. dont see how thats safe.... but does anyone kno what a good bore n compression ratio to run would be?

[Zyth01]

Find someone with a turboed 2700 pound car with 600whp and have them take you for a ride. If you still want one come back and ask again. But I'm betting after that experience you'll probably want in the ballpark of 250-350 which is still a shitton for how light the e30 is.

[StreetRacerS360]

if you can find me somone with one in daytona beach orlando or Ft.lauderdale or Miami area i would be more then happy to take a ride in one. The car might be light but im going to be taking it to the drag strip quiet often.

[E30Idea]

if you can find me somone with one in daytona beach orlando or Ft.lauderdale or Miami area i would be more then happy to take a ride in one. The car might be light but im going to be taking it to the drag strip quiet often.

You just commited R3V suicide dude. Drag racing a bimmer FTL. :(

I will understand if it is every once in a while for fun but get something different if you want a drag car.

[StreetRacerS360]

I want to drift r auto cross it. But I don't have the time to practice drifting and I never know when there is a autocross event.

[StereoInstaller1]

if you can find me somone with one in daytona beach orlando or Ft.lauderdale or Miami area i would be more then happy to take a ride in one. The car might be light but im going to be taking it to the drag strip quiet often.

Goddamit, kid, your attitude pisses me off.

So let me get this straight...you want US to find YOU a car to get a ride in...as long as it is close by? You sound like a spoiled little rich bitch. What kind of shit is that?

You are an obvious retard.

What the fuck, are you like 16 or what? "StreetRacer" as a fucking screen name? Wow, we are SO impressed.

"I want 600 HP, but I don't want to do a swap, what internals should I use"...so let me get this straight, you think you are qualified to build the fuck out of a bottom end, but yet cannot pull off a swap?

Zero fucking experience in any kind of built car, but now you want an E30 (with 600HP, no less) to drag, auto-x AND drift? Do you realize that those are basically 3 different cars?

My suggestion to you is go buy a Viper. If you have the money to build a 600HP 20 year old entry level BMW that can drag, drift and auto-x, that should be pocket change for you.

Soon as you get out of the hospital after you plow that mopar into a telephone pole, let us know. Maybe then you will start being ready to become teachable.

In the meantime, shut the fuck up and read. Learn some shit before you run your keyboard. We aren't the fucking retard Honda boys, if you wear a fucking hat, wear it straight. Pull your fucking pants up, too.

Oh yeah..."meth injection" would be water and methanol mixed 50/50 and injected into the intake plenum (you do know what a plenum is, don't you?). This cools the intake charge to reduce detonation (pre-ignition, actually, but I don't think we should get too technical here) as well as provides a bit more O2, and the steam cleans the inside of your combustion chambers...but "meth injection" doesn't "sound too safe"

[atomic]

Train wreck happening in

5...

[FredK]

ya u can get most of the parts at www.jegs.com or www.summitracing.com they have a lot of cool stuff i think lunati makes a turbo grind cam for the m20. maybe some 1.7 to 1 ratio roller rockers and i tink ur good to go.

[Ray Smoodiver]

I think you need to talk to those guys with the 1000hp M3

[Turf1600]

roffle

[dashboardmonkey]

train wreck happening in

5...

4...