S14 swap in to 325is

[avery0829]

To start off, I know/ read that 24v swaps will be cheaper and can achieve more power with less money involved as well more reliability.

I have a full part E30 M3 to my disposal, I was really looking for information on wiring, swap parts (mounts anything custom etc.) I have searched through google and various E30 sites. I just keep seeing the same thing about someone wanting to do the swap but not having the motor or anything and having to buy it all.

Thanks

[ben312]

is the m done then? i would say just rebuild the m3, but you sound as if it can't be done.

[Farbin Kaiber]

if you have a full parts car this is a swap over of parts, nothing more. Nothing custom would be needed.

[Fast Frankie]

build m3 race car?

[e30s52]

Why cant you just swap everything over?

[avery0829]

The M's totaled, 100%.
I never said it couldn't be done. I was just curious if anyone had done it or heard much about it being done.

Swap everything over? Couldn't the same be said about a 24v. I was looking for a little more specifics. but thanks though.

[IRON-E]

OT. What suspension are you running? Your stance looks beautifull

[Farbin Kaiber]

it's a straight swap, pull the engine/trans/driveshaft, rear diff, and install them into your non-M e30. Then swap radiator/cooling system into car, then hook up wiring and bam.

[e30s52]

it's a straight swap, pull the engine/trans/driveshaft, rear diff, and install them into your non-M e30. Then swap radiator/cooling system into car, then hook up wiring and bam.

Yeah I mean everything is the same. This would be easyer then a 24v swap by along shot but then again 24v swaps arent hard ethier.

[Farbin Kaiber]

^^^ that.

[ubernasty]

^^^ that.

^^^^this.

[Farbin Kaiber]

it's easier too.

[SpecM]

^^^^this.

^^^ and the other

[e30s52]

it's easier too.

But it wont be as fast.

[Farbin Kaiber]

but it will sound nice. swap the exhaust over too.