M30 motor using M20 loom/harness?

[Erick]

spark sensor.

I knew it! :p

When I said oil pressure plug I was like "that really makes no sense... but I can't think of what else it could be.

Yeah, what Nando said. (please don't ban me Josh)

[Paz]

Sweet, it runs!

Turns out the M20 loom was damaged and repaired badly.. Well, it just wasnt repaired. Once i found that out i had fuel but it still didnt run, so swapped the crank and spark sensor wires around and away it went.

Now to finish the prop (im gonna use an M20 2.5 output flange on the back of the M30 box and it should let the 2.5 prop fit, bolt up the exhaust and its done.

[weaksauce]

way to go!

i got a box full of new hoses and gaskets in yesterday afternoon for mine. I am replacing everything rubber or gasket wise on my B35 before it goes back in the car.