Announcement

Collapse
No announcement yet.

And another M30 swap begins

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • E30 Beast
    replied
    1.(for first 2 pics) can i use some of the m30 sensors or do i need to swap them all out

    2.(for third pic) can i use this still or do i need to swap out for e30 one

    3.(last pic) where can i get the tranny sensor from since mine is all beat up
    Attached Files

    Leave a comment:


  • E30 Beast
    replied
    Originally posted by zaust View Post
    Was the e32 auto ? Would have a different flywheel.
    yes it was from an auto, would that really make a difference though

    Leave a comment:


  • E30 Beast
    replied
    Originally posted by Jean View Post
    Yes, get the e32 or e34 m30 starter, they are smaller and easier to install/remove.
    sounds good now i just need to wait for my lghtwght flywheel to come in nd ill check it out

    Leave a comment:


  • yert315
    replied
    I am using an auto starter on my car. Pretty sure the teeth of the auto and manual flywheels are the same.

    Leave a comment:


  • zaust
    replied
    Originally posted by E30 Beast View Post
    had a quick question, can i use any starter from an m30 equipped car because i picked up a starter from an 735 nd it seems to be a lil short any opinions would be much appreciated

    Was the e32 auto ? Would have a different flywheel.

    Leave a comment:


  • Jean
    replied
    Yes, get the e32 or e34 m30 starter, they are smaller and easier to install/remove.

    Leave a comment:


  • E30 Beast
    replied
    Originally posted by yert315 View Post
    if it was from an e32, you're good. I believe the starters are interchangeable between any m30 equipped car. Don't quote me on that though.
    thanks yert i really hope so bcause this is my second starter nd im starting to think im really gonna run into problems with this situation:( ill take a pic when i wake

    Leave a comment:


  • yert315
    replied
    if it was from an e32, you're good. I believe the starters are interchangeable between any m30 equipped car. Don't quote me on that though.

    Leave a comment:


  • E30 Beast
    replied
    had a quick question, can i use any starter from an m30 equipped car because i picked up a starter from an 735 nd it seems to be a lil short any opinions would be much appreciated

    Leave a comment:


  • E30 Beast
    replied
    sounds good if only they weren't hard to find in cali

    Leave a comment:


  • weaksauce
    replied
    so a 3.46 is the hot setup?
    i have a 4.10 and a 3.73 lsd at the house, but there is a 3.46 at the pick n pull near me. If I had time sundayI would have pulled it.

    Leave a comment:


  • zaust
    replied
    I had a 3:64 lsd and could spin up in all gears without trying. Just fitted a 3:46 lsd and have a huge amout of extra traction, can still silp it for drifting very easy, but a 73 :o pointless imo...

    Leave a comment:


  • Jean
    replied
    Originally posted by george graves View Post
    I think of the 3.73 on a m30 like running a 4:10 on a m20. Maybe the 3.73/m30 is a bit shorter feeling?
    Yep, makes for a nice hill climb car lol

    Leave a comment:


  • E30 Beast
    replied
    thanks everyone for all your helpful inputs, i wish i could find a 3.25 but those are hard to come by out here so i guess ill just stick to the 3.73

    Leave a comment:


  • george graves
    replied
    I think of the 3.73 on a m30 like running a 4:10 on a m20. Maybe the 3.73/m30 is a bit shorter feeling?

    Leave a comment:

Working...
X