If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So as long as the overflow tank is higher than the radiator you should be OK?
no as long as the overflow is higher than the hose going from the overflow to the thermostat housing is gravity fed. it has to be higher than about the middle of the thermostat housing.
not necessarily. I'm running the m20 bottle and have no issues with bleeding. The feed hose is longer than it should be and has an "s" bend in it so the flow isn't optimal. But I use the "blow through the pisser line" method (that sounds dirty) which works quite well.
Comment