M30 Stroker (not m90) - crank options/rods options?

[lashtx]

i didn't, but i have 3 M30's now, so i bet I could scrounge up a head to have rebuilt if I needed to.

You recomend anyone local to us?

[PУCCKAЯ_e30ka]

[kylekrueger]

Do you know if s50 pistons will work on a stock m30?

Also, are the s50 pistons forged as well because i know that the stock m30 ones are cast but the crank and rods are forged.

EDIT: never mind, s50 pistons are a much different bore than the m30 ones, my bad

[lashtx]

Head

i didn't, but i have 3 M30's now, so i bet I could scrounge up a head to have rebuilt if I needed to.

Got a buddy coming to get mine this Sat. He is going to pull it apart clean it and tell me what I need to order as far as replacement parts. Need to figure out the cam thing. Then need to figure out if I oring or mls it!!

Kris

[weaksauce]

You recomend anyone local to us?

city motor is cheap for decking, but automotive machine in ft worth does excellent work
I'll drive over to them for my machine work if I need any.