What tires was that with?
Announcement
Collapse
No announcement yet.
Couple quick clips
Collapse
X
-
Thanks! This was on bfg g-force in 205/50r15 so a little undersized.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Yeah the 225/50 v710s are strickly for autocross use only :) I really wanted to get 225s but my dd wheels aren't ideal in offset so I had to get 205s for now...Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Originally posted by BonnschE30 View Postawesome man! really close to the setup I want for my sedan...is the 3.46S only a euro and small case? and are you using 533 single mass flywheel?Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Correct, stock/rebuilt b35 with 533 flywheel. About 7.5k miles.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Not much in terms of bottom end, expensive - http://www.r3vlimited.com/board/showthread.php?t=162408
There are options for cams though.... from what I gathered IE regrinds used to be "SOFT" not sure if they are any better now. Good option would be to talk to Paul Burke, everybody recommends him when it comes to m30 work.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Originally posted by Jean View PostCorrect, stock/rebuilt b35 with 533 flywheel. About 7.5k miles.
I am looking into making a built N/A engine and I am collecting information
Comment
-
533 flywheel is lighter correct. The engine is 100% stock, no modifications other than the flywheel. Good eye, dme I used is chipped.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
Comment