Announcement

Collapse
No announcement yet.

SO Close!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    SO Close!

    Early August I dropped a valve In my 325es and a few days later I found a 85 M30B34 and Transmission with 50,000 miles. With thin funds Its taken me a while but it is in and ready to go.
    I Just bought a new battery and everything is plugged in but when i start it wont Idle without giving it a smidge of throttle and it runs really rough like it putting to much fuel in the engine all the wires are right and i have the right ECU. Any Ideas?

    #2
    vacuum leaks.

    Comment


      #3
      Originally posted by Danny View Post
      vacuum leaks.
      Checked all vacuum lines today and all lines are solid and connected :\

      Comment


        #4
        Loose TPS?
        1987 325i-M60b44 swap

        Comment


          #5
          Fuel pressure regulator, cold start valve, coolant temp sensor, etc etc.

          I plugged the CSV hose and unplugged the harness. Fixed the rough running issue in my '85 535i. Also replaced the CTS and pressure regulator, helped a little too. I'm pretty much baselining the whole motor, a good practice if you don't know how long some of these items have been in there, my guess would be 25 years.
          1974.5 Jensen Healey : 2003 330i/5

          Comment


            #6
            Have you mixed up the tps and icv plug's ???
            325i touring, 327i 2 tone tech 2, 335i tech 1 touring with nossigpic

            Comment


              #7
              Originally posted by zaust View Post
              Have you mixed up the tps and icv plug's ???
              Well I'm running motronics 1.1 so the ICV has a very distinctive male female plug so i couldnt get them confused :S

              Comment

              Working...
              X