So if somebody uses a Getrag 240 for their m30 swap, what is a good clutch/pressure plate to use? I would assume that a stock m10 clutch wouldnt hold the torque of the big 6.
-
RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
Welcome e30 (brilliantrot '90 325is) 12/23/06
DaveCN = Old Man
My signature picture was taken by ME! Not by anyone else!
Originally posted by george graves -
Hey Peavey i use a 240 in my swap and used a stock clutch for almost 2 years before the slipping got to bad. Then i found a shop that makes their own custom clutch out of the stock m10 one so once i f*ck this one i'll send it back and they'll just rebuild it. So all in all you will be fine with stock just for street driving, or go a beefed up m10 clutch straightg away. -
i used a 325i clutch kit with my m10/g240. im sure you can use that on the m30 swap with the m10 g240 transmission...?Comment
-
i use a sach stage 384' 318i m30b35 swapped!
Comment
Comment