Announcement

Collapse
No announcement yet.

M10 clutch for m30 swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M10 clutch for m30 swap

    So if somebody uses a Getrag 240 for their m30 swap, what is a good clutch/pressure plate to use? I would assume that a stock m10 clutch wouldnt hold the torque of the big 6.
    RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
    Welcome e30 (brilliantrot '90 325is) 12/23/06
    DaveCN = Old Man
    My signature picture was taken by ME! Not by anyone else!



    Originally posted by george graves
    If people keep quoting me in their sig, I'm going to burn this motherfucker down.

    #2
    Hey Peavey i use a 240 in my swap and used a stock clutch for almost 2 years before the slipping got to bad. Then i found a shop that makes their own custom clutch out of the stock m10 one so once i f*ck this one i'll send it back and they'll just rebuild it. So all in all you will be fine with stock just for street driving, or go a beefed up m10 clutch straightg away.

    Comment


      #3
      i used a 325i clutch kit with my m10/g240. im sure you can use that on the m30 swap with the m10 g240 transmission...
      ?

      Comment


        #4
        i use a sach stage 3
        84' 318i m30b35 swapped!

        Comment

        Working...
        X