M30 swap for my Olive Drab Vert!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ThatOneEuroE30
    R3V OG
    • Dec 2013
    • 8626

    #466
    God that things gonna be a beast.


    1989 325is l 1984 euro 320i l 1970 2002 Racecar
    1991 318i 4dr slick top


    Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
    Vintage race car revival (2002 content)
    Mtech 2 turbo restoration
    Brilliantrot slick top "build"

    Comment

    • Good & Tight
      Forum Sponsor
      • Apr 2004
      • 2057

      #467
      Damn it fits...!! You will notice a huge difference for sure in spool time for sure. Re-tune in order before you get crazy on the throttle.
      Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
      ____________________________
      E-mail Panayiotisx2@gmail.com
      Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

      Comment

      • LowR3V'in
        R3V Elite
        • Feb 2004
        • 4209

        #468
        How u like that cat cam? I'm looking to get that same one.
        Says you can use stock springs with it.

        Nevermind I see your post #381. Was that same boost?

        Originally posted by RagtopE30
        Went to the dyno today for 3 runs and no tuning.
        Because I want a reliable daily driver I along with the help of Otis and another friend changed the spark map to a more conservative tune.
        I also removed the boost controller and ran off of the wastegate which is 12.5psi

        All that being said,

        In May the car, with a more aggressive spark map, made:
        414whp and 427wtq

        Today the car, with the new cam and conservative tune, made:

        407whp and 464wtq

        I lost a little bit of hp but gained tq. I am sure that if I went with a more aggressive tune I could also see gains in hp but my goal is to have a reliable daily driver. The question on my mind is this, Was it worth paying the $500ish for the Cat Cam?

        Long answer short- Yes.

        Even though the Hp seems to have suffered on paper the power comes in sooner and smoother. Once the boost builds the tq is amazing. Seeing as how we basically de-tuned the MS the gain in tq says a lot. I am more excited now than ever about getting meth injection on this car and turning it up.
        Last edited by LowR3V'in; 01-17-2016, 06:52 PM.

        Comment

        • CorvallisBMW
          Long Schlong Longhammer
          • Feb 2005
          • 13039

          #469
          Jesus, it's like turbo porn in here... awesome

          Comment

          • jim325
            Wrencher
            • Sep 2010
            • 228

            #470
            Excellent sir. Can't imagine how fast that thing is gonna spool.
            89 325i: 86 535i motor+trans, JE forged pistons, MLS head gasket, ARP head studs, Comp turbo, GoodNTight b34 turbo manifold, e30.de motor mounts, AKG 75D engine/trans mounts, custom 3" exhaust, intercooler, MS2PNP, Megan Racing Coilovers.

            Comment

            • RagtopE30
              E30 Mastermind
              • Dec 2010
              • 1869

              #471
              So I got some work done! I didn't want to completely rebuild the down pipe so I modified what I had. And I got to practice my metal working skills when I reduced a 3" pipe down to match the V-band flange. I need to finish the welds and wrap the down pipe again, connect the oil return, have the coolant lines made and install, and change the oil & filter. Afterwards I will need to tweak the tune.

              Pic time!















              Sent from my iPhone using Tapatalk
              450whp 524 lb-ft 1988 336ic In progress

              http://www.r3vlimited.com/board/showthread.php?t=250709

              Comment

              • ZenitramNaes
                Advanced Member
                • Jul 2012
                • 150

                #472
                Very nice, the downpipe is one of the larger obstacles I have left. Looks good.

                Sent from my SM-G920V using Tapatalk

                '89 535i/5 Holset WH1E turbo
                Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

                Comment

                • RagtopE30
                  E30 Mastermind
                  • Dec 2010
                  • 1869

                  #473
                  The return from the waste gate is the biggest puzzle. But this is the second time around for me on this down pipe so it's not so bad. With the new turbo the positioning of the down pipe is much better allowing much more clearance in places that were previously extremely tight


                  Sent from my iPhone using Tapatalk
                  450whp 524 lb-ft 1988 336ic In progress

                  http://www.r3vlimited.com/board/showthread.php?t=250709

                  Comment

                  • LJ851
                    R3V OG
                    • Nov 2010
                    • 7918

                    #474
                    Looking good, can't wait to see the dyno charts!
                    Lorin


                    Originally posted by slammin.e28
                    The M30 is God's engine.

                    Comment

                    • RagtopE30
                      E30 Mastermind
                      • Dec 2010
                      • 1869

                      #475
                      M30 swap for my Olive Drab Vert!

                      Oh and I got some v band flanges.... I'm going to make my muffler a "quick change" and have a straight pipe to swap with it at will! It'll sound like raw testosterone, red bull, and the sobs of Thor as he realizes that his hammer holds nothing on my car!


                      Sent from my iPhone using Tapatalk
                      450whp 524 lb-ft 1988 336ic In progress

                      http://www.r3vlimited.com/board/showthread.php?t=250709

                      Comment

                      • Bearmw
                        E30 Fanatic
                        • Aug 2010
                        • 1323

                        #476
                        Nice.
                        Never argue with stupid people, they will drag you down to their level and beat you with experience. -Mark Twain

                        Comment

                        • RagtopE30
                          E30 Mastermind
                          • Dec 2010
                          • 1869

                          #477
                          Wrapped and installed down pipe. I'm loving the fitment.








                          Sent from my iPhone using Tapatalk
                          450whp 524 lb-ft 1988 336ic In progress

                          http://www.r3vlimited.com/board/showthread.php?t=250709

                          Comment

                          • RagtopE30
                            E30 Mastermind
                            • Dec 2010
                            • 1869

                            #478
                            So, things happened early this morning and then being a single dad/snow got in the way of progress.

                            I finished and installed my "quick change" rear exhaust section. The restrictive and heavy flow master series 50 muffler is now on the shelf. In its place..... V-band and straight pipe!

                            *use headphones while watching the video, your phone/laptop will not do it justice!*





                            Sorry, we couldn’t find that page



                            Sent from my iPhone using Tapatalk
                            Last edited by RagtopE30; 02-09-2016, 12:26 PM.
                            450whp 524 lb-ft 1988 336ic In progress

                            http://www.r3vlimited.com/board/showthread.php?t=250709

                            Comment

                            • ZenitramNaes
                              Advanced Member
                              • Jul 2012
                              • 150

                              #479
                              Very nice, the wrap job on those pipes is on point!

                              Sent from my SM-G920V using Tapatalk

                              '89 535i/5 Holset WH1E turbo
                              Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

                              Comment

                              • RagtopE30
                                E30 Mastermind
                                • Dec 2010
                                • 1869

                                #480
                                ^Thank You. Practice makes perfect!
                                450whp 524 lb-ft 1988 336ic In progress

                                http://www.r3vlimited.com/board/showthread.php?t=250709

                                Comment

                                Working...