M30b35 vacuum lines

[Norma]

I just changed the head gasket on my 89 735i motor and I have everything hooked back up but the intake. (To my assumption) my stall is vacuum lines...
I have no pictures currently but I could take some if needed. Anyone have a vacuum routing guide for this motor?!

[JoeMadoo]

The vacuum setup is pretty simple on the m30 compared to other motors. You could always go to a junkyard to look at someone elses setup.

Searched "m30 vacuum diagram" in google and found this.

[chance]

I did not install the charcoal canister, and I also ran the fpr straight to the valve cover hose tee and capped the ports on the bottom of the intake.

Am I going to have any problems doing this or do I need to run vacuum lines to the bottom of the inake and back to the tee.

[uturn]

The FPR works under vacuum. Your current setup, that tee gets nothing but positive pressure coming from the crankcase.