If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My oil pump sprocket seems to have come off from vibration; what's the best way to do this job? I don't have an engine hoist currently; I can get one if it'
s necessary.
You'd have to jack the motor off of the subframe after loosening the mounts and the set the motor down on a jack stand under the crank pulley.
That's just a suggestion. But something of that nature would do it.
Taylor
This, if i didnt have an engine hoist.
///Monstrosity. (OO≡≡[][]≡≡OO)
Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.
or the quick way is to go off track at 120mph and get your e30/m30 airborne and land on something hard - problem solved - timing chain is easy to get to :)
Comment