Im just getting into bmws and i have a regular 87 325. i was wondering what is the difference between the 325 and the 325i/is/ix are they dohc why do they rev higher than the 325s. if anyone can tell me the difference i would really appreciate it
Announcement
Collapse
No announcement yet.
what is the difference
Collapse
X
-
Well to start off with, there's no such thing as a regular 325 AFAIK. There's 325e, 325es, 325i, 325is, and 325ix. No six-cylinder e30 comes 'dohc' from the factory. The e and es are 'eta' motors that are built more for economy and low-end torque, and due to their light valve springs, can't rev very high. the 'i' variants are the sportier cars that have slightly less torque but much higher horsepower and rev limits.
Hope that cleared things up a bit.This is your M20 on steroids:
-
Some stripped down etas were badged just "325". My 89i only has a "325" badge, and no indication of an "i" being removed from it. 325i's have dual valve springs, a hotter cam (sohc), bigger throttle body, different intake manifold design, and dual exhaust, and make about 50hp more than etas. Etas have slightly more torque at a lower RPM. i's redline at 6400, and etas redline at (I believe) 4700.Originally posted by MrKWell to start off with, there's no such thing as a regular 325 AFAIK. There's 325e, 325es, 325i, 325is, and 325ix. No six-cylinder e30 comes 'dohc' from the factory. The e and es are 'eta' motors that are built more for economy and low-end torque, and due to their light valve springs, can't rev very high. the 'i' variants are the sportier cars that have slightly less torque but much higher horsepower and rev limits.
Hope that cleared things up a bit.
My fast says: traction control is for the faint of heart :evil:
Comment



Comment