m30b35 in e30 wont spark

[willy-guldager]

Hey, so im currently trying to get my m30b35 swap to work in my e30.
Everything is plugged in but the car wont start. There are no sparks from the spark plugs. I've found a wire which is really bad (see picture)


Could this be the reason? Also my fuelpump doesnt turn on. When i had my m42 in my engine, when i turned ignition on, you would be able to hear the fuel pump, but it doesnt anymore.
Is there anyone who could give me a hint maybe?

[ForcedFirebird]

Motronic 1.3 doesn't prime the pump with key on. The engine will run fine with that wire off. Follow that broken wire down to the connector, it's the identical connector to the crank sensor and is easy to mix up. The ECU will not throw spark or turn on the fuel pump if they are reversed.

[dannyyisntt]

Check your crank sensor as well

[ForcedFirebird]

Check your crank sensor as well

Yup. Should get 580ohms or so on two of the pins.

[Doughnut]

Ensure your coil has 12v.