E30 M30 Exhaust suggestions

[uturn]

Other than the mythical Alpina B6 3.5 setup, who else makes a bolt on header and full exhaust for the E30M30? Don't say BTB, already contacted them and they refuse to ship to the states.

[e30m3s54turbo]

Ireland Engineering makes a nice Hartge rep header.

http://www.iemotorsport.com/bmw/E28-E24-exhaust/m30header.html

[uturn]

Just remembered there's a Euro 320is that shares the same piping size as the M3 but has a kink in the tailpipe to clear the MT2 rear valence. Looks I'll be giving my car the full "Supersprint" treatment!
Raul, thanks for jogging my memory.

[quickervicar]

Does the IE piece clear the E30 application? I'm thinking that the Garagistic mounts are the only ones that allow this to happen.

[e30m3s54turbo]

Just remembered there's a Euro 320is that shares the same piping size as the M3 but has a kink in the tailpipe to clear the MT2 rear valence. Looks I'll be giving my car the full "Supersprint" treatment!
Raul, thanks for jogging my memory.

No problem Tom.

You are welcome to text me any time for Q.

[glnr13]

Does the IE piece clear the E30 application? I'm thinking that the Garagistic mounts are the only ones that allow this to happen.

i have both. they almost clear, requires a little cutting and modifying for the rear header to clear the firewall.

u-turn, i don't think you're going to find a bolt on exhaust for this install. Also the e30 body is considerably shorter than the e34 so any bolt ons for an e34 aren't going to work either.

I'm running an e34 magnaflow cat and dual all the way back to a pair of 12" generic mufflers.