Can't wait to install these this weekend...

[E30_pilot]

Lukas Heatshield(need to be modified for us early e30s),M30 AFM,KN Filter,19lbs injectors,new o-rings.


And this just came in today...MarkD chip...

Might put in an AFPR in the future,but I think Motronic should re-configure everything.

What should I used to lube the new o-rings for injectors?

[e30 gangsta]

Good stuff i have the same setup with the 93 octane chip. I love it!

[euroshark]

Petroleum Jelly - Vaseline

[Ball325]

i have that setup but unlike most im against just putting them in and hoping for the best. With out dynoing the car and optimizing it i find all mods worthless

[E30_pilot]

i have that setup but unlike most im against just putting them in and hoping for the best. With out dynoing the car and optimizing it i find all mods worthless

I'm called upa friend that might help me find a shop and to setup a dyno session and tuning.

[Ball325]

I'm called upa friend that might help me find a shop and to setup a dyno session and tuning.

awesome finaly someone who is going to properly tune this set up so the community can get the information they are after.

[e30 gangsta]

What more do you want. I posted vids and pics along with dyno sheets. All I was able to put down was 150rwhp. Ill try again though.

[Ball325]

mind posting a link to this data? video isnt gonna tell us much but a dyno sheet with a A/F Ratio that wasnt smoothed out like most shops do will help.

i cant wait to see what i put down with MAF and BBTB and my cam. I already put down 153whp but that dyno has always read low. example my uncles 2.5L 11:1, port/polish and larger TB's dynoed 190whp, my sotck 2.3L M3 with mild cams dynoed 192whp on a more modern SAE Corrected dyno. his motor is much much stronger than mine and supposedly i have more power so. Im thinking im in the 165 range. Cant say for sure though

[matte30is]

Is the m30 afm direct plug and go? Or do you have to modify the wiring?

[bumpstop335i]

Is the chip tuned for the M30 afm aswel?