Question about cam in m30b35

[Streichholzschächtelchen]

Building an m30b35 with 9.2:1 compression ratio, planning on using the Schrick 280/284 cam. Stumbled across the Dbilas 288 cam. Do I have high enough compression ratio to make use of the 288? Or should I just stick with the Schrick?

https://www.turnermotorsport.com/p-3...4-deg/?pdk=AwE

http://www.dbilas-shop.com/Products/Performance-camshafts/BMW/2-5-3-5-6-Zyl-M30/New-Camshafts/BMW-2-5-3-5-6-Cyl-M30-Performance-camshaft::4933.html?XTCsid=fsk4rhbdif3rf6t9daeutjmhl1

[TobyB]

If the m30 is just 3/2 of an m10, then yes, do it.

We use 292 cams in 9:1 m10s all the time.

t