Honda K24 swap interest?

[Keith1054]

I’m very excited about this! Interested to see your pan/mount designs, and if any subframe modification is necessary.

[ahrensNW]

This'll be rowdy for sure. Can't wait!

[wholepailofwater]

Awesome news, looking forward to this.

[KMiata]

Woo woot, looks like they just dropped some g260 transfer adapters

Yup, enough people were asking about them so we did some in our next batch of adapter plates.

We should have some machined billet aluminum engine mounts and an aluminum oil pan in the next couple weeks as well.

[wholepailofwater]

getting closer!

[ahrensNW]

Woo woot, looks like they just dropped some g260 transfer adapters

[wholepailofwater]

Even though I'm new around here. I'm not new to bad @ss swaps and if if i do go the swap way. I'd seriously consider this one. The balance and power could be amazing!

JP

[ahrensNW]

Pics :)

[varg]

A K24A2 E30 would be a good alternative to an S14 powered E30, that's for sure. If you want a responsive I4 E30 you get the same power, but in a lighter package, and not stupidly expensive (muh racin heritage). Those Honda cylinder heads can really breathe.

It's almost quicker to 100 than my M50 swapped E30 is.

You gotta pressurize that M50 if you want to keep up with V6 family cars!

The pilot should feel like a bus though, compared to a ~2,800lb E30 with a 189hp. It only has 255hp to move its 4,400lbs down the road.

[ahrensNW]

Saaaame. Thinking about a k24 e30 makes me drool.

[Shangsta]

Looking forward to pics of that k in an e30 bay

[Sladek]

Can't really give a timeline at this point, but we will have more info soon. It really depends on how it all comes together. Building a running and driving swapped car is the easy part. Sorting out a full production swap is a different story. Luckily, we're good at it now.



Regarding a pic of the engine in an e30 bay, that will come in good time :)

like I said if you want a super clean E30 M3 to perfect it on let me know and I'll bring it to you minus the current engine lol


Sent from my iPhone using Tapatalk

[KMiata]

kmiata, do you know what kind of time frame you'd be looking at for the kit to be ready? end of the year? sooner?

Can't really give a timeline at this point, but we will have more info soon. It really depends on how it all comes together. Building a running and driving swapped car is the easy part. Sorting out a full production swap is a different story. Luckily, we're good at it now.

Regarding a pic of the engine in an e30 bay, that will come in good time :)

[Wanganstyle]

One of the guys I race with is just finishing up his Mazda Miata build with a Honda V6 out of IIRC, Odyssey. He's been putting it together over the past several years, and it does start and drive. There was a lot of fab work used to get it in there, but I'll be curious to see the lap times this season if he makes it out..

Mazonda

J swap in miata works well if the trans and Diff don’t die. Local friend has one

Car is fast on the circuit if running Happy.

[djjerme]

One of the guys I race with is just finishing up his Mazda Miata build with a Honda V6 out of IIRC, Odyssey. He's been putting it together over the past several years, and it does start and drive. There was a lot of fab work used to get it in there, but I'll be curious to see the lap times this season if he makes it out..

Mazonda