This might seem like a stupid question, but what do I use as a reference point as to where my engine should be mounted? Like how do I center it? Do I just go from the mounts to the chassis or the center of the crank or what?
-
-
Center of the crank, the entire drivetrain is placed according to the center of the crank.'88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5 -
Ok. I just wanted to be sure before I started welding.Comment
-
Make sure that the engine is tilted approximately right too, in the 6 series is was a full 30 degrees... I don't know the number for the E28s, but it was a bit less than that. I'm curious to see how this turns out! Maybe I'll have to build another 335i some day.'88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5Comment
-
The M30 goes in the engine bay.
J/K good luck with your swap :DThis is your M20 on steroids:
Comment
-
Comment