Announcement

Collapse
No announcement yet.

nissan swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    nissan swap

    does anyone have any info on doing any sort of nissan/datsun swap. me and my friend want to do one to my eta, he has like 15 nissan/datsun motors sitting around doing nothing..just looking around to see if its possible/any write ups or anything

    thanks
    --eric



    #2
    I really hope its not a wee a12 or a14 you want to put in there? Hoe its a CAD18DET or a SR20DET ? If so its been done alot of times here in NZ. Jump onto www.bimmersport.co.nz And search for sr20 etc

    Riley

    oh it makes for a very quick and well balanced e30 :)
    sigpic340hp V8 e30 FINISHED!!!!!
    Quick vid for ya ;) http://www.youtube.com/watch?v=vp5Eaf8xOgM
    NEW One on the track :)
    http://www.youtube.com/watch?v=K-AX5SzSLnk
    Cleaning up some 911s and Jap turbos
    http://www.youtube.com/watch?v=Ad79wsLdle4

    Comment


      #3
      im thinking sr20, or L series, my buddy is big into nissan and has an assload of motors sitting around doing nothing.


      Comment


        #4
        Sr20 would be interesting. You may run into clearance issues on the drivers side though, since its not a slant motor...

        -J
        Joe Funk -- Portland Oregon
        That Guy.
        03 X5. 3 liter obviously.

        Comment


          #5
          Originally posted by Funkmasta View Post
          Sr20 would be interesting. You may run into clearance issues on the drivers side though, since its not a slant motor...

          -J
          GT Technic runs their M42 race engines upright and have no problems. But then again, they have fully-prepped Dmod cars.

          An SR20DET has already been physically swapped in, there is a thread somewhere on E30Tech about it. Can't seem to find it though. I can imagine wiring might be a problem though...


          -Brandon

          Comment


            #6
            wiring isnt an issue, i am a madman for the most part when it comes to electrics..i mean..my friend has like 20 old nissan/datsun motors just laying around, and im tired of how slow my "eta" is so we might start a project..he has an L series and its a straight 6 and looks to be pretty damn close in comparsion with an m20.


            Comment


              #7
              It would be an excellent project. There is tons of aftermarket support in terms of building the engine to be both powerful and reliable.

              What do you want to do with the car?


              -Brandon

              Comment


                #8
                As i said have a look on www.bimmersport.co.nz and use the search . Its been done heaps
                sigpic340hp V8 e30 FINISHED!!!!!
                Quick vid for ya ;) http://www.youtube.com/watch?v=vp5Eaf8xOgM
                NEW One on the track :)
                http://www.youtube.com/watch?v=K-AX5SzSLnk
                Cleaning up some 911s and Jap turbos
                http://www.youtube.com/watch?v=Ad79wsLdle4

                Comment


                  #9
                  L22?

                  Comment


                    #10
                    the last time i saw a nissan straight six was in an old 300zx turbo.
                    My 2.9L Build!

                    Originally posted by Ernest Hemingway
                    There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.

                    Comment


                      #11
                      Originally posted by PiercedE30 View Post
                      the last time i saw a nissan straight six was in an old 300zx turbo.
                      What about the RB series? RB20DET,RB25DET,RB26DETT Godzilla engine? they are some of the most popular and affordable performance engines around. Prob not availble in the states tho :( hehe good for us
                      sigpic340hp V8 e30 FINISHED!!!!!
                      Quick vid for ya ;) http://www.youtube.com/watch?v=vp5Eaf8xOgM
                      NEW One on the track :)
                      http://www.youtube.com/watch?v=K-AX5SzSLnk
                      Cleaning up some 911s and Jap turbos
                      http://www.youtube.com/watch?v=Ad79wsLdle4

                      Comment


                        #12
                        L series engine wouldn't be much improvement over an M20, would it?

                        EDIT: And they're non-crossflow?

                        Comment


                          #13
                          Check with Alex of DENT Sport Garage. He swapped an SR20DET into his E30 hill-climb/time-trials car. Lots of fabrication work, as you'd expect (the exhaust being on the wrong side doesn't help).



                          More details: http://www.dentsport.com/gallery/v/d...cec7d762823e29

                          Emre
                          sigpic
                          1987 Mercedes 190E 2.3-16: Vintage Racer
                          2010 BMW (E90) 335xi sedan: Grocery Getter

                          Comment


                            #14
                            L28ETT with triple mikuni 44's would be super sick...
                            IG: @Baye30

                            FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                            Comment


                              #15
                              Originally posted by PiercedE30 View Post
                              the last time i saw a nissan straight six was in an old 300zx turbo.
                              No such thing as a straight 6 300zx turbo. you must be thinking of a 280zx turbo.
                              97 tacoma 5 spd 4 cylinder
                              2001 330ci 5 speed
                              83 733i 5 speed, (FS)

                              Comment

                              Working...
                              X