Announcement

Collapse
No announcement yet.

E30 M30 SWAP writeup.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Yeah, it motivates me to:
    1) do my swap already
    2) take pictures of EVERYTHING.

    I'm pretty sure I have everything, just need to document the hell out of it for you guys.
    I'm building a new subframe, and will just drop the whole front assembly from the car, transfer the struts to the new subframe, and drop the car on there and bolt/wire it up!
    Slicktop City!

    Comment


      #47
      Here is my thread with lots of pictures / documentation as well :


      Building a new subframe? OR just using another stock subframe to install everything on?

      I also lowered the car onto the new engine/tranny attached to the subframe etc...way easier.
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment


        #48
        Originally posted by Jean View Post
        Here is my thread with lots of pictures / documentation as well :


        Building a new subframe? OR just using another stock subframe to install everything on?
        Sorry, yes. another stock subframe. But I have a small part of me that wants to get it reinforced. I've already had a rear subframe redone with the toe/camber kit, might as well make them match, huh? Maybe not.

        p.s. Thanks for posting your thread, too.
        Slicktop City!

        Comment


          #49
          Originally posted by chadthestampede View Post
          Even more so now that Jared Squires site no longer exists.
          Should be available for a long time on the wayback machine:

          "If the sky were to fall tomorrow, the tall would die first."

          -Dr. Paul Forrester



          Do I LOOK like I need a psychological evaluation???

          Comment


            #50
            Whoa. THAT is a neat trick.
            Slicktop City!

            Comment


              #51
              im in the planing stage for this swap, i have a 91 318i with the m42, where do i look up the wiring part?
              Originally posted by Erick
              Dude the M30 is stupid simple design. It's 6 manly men inside the block pushing up and down on the cylinder with Hercules-like force.

              Comment


                #52
                Originally posted by PFCRayB View Post
                im in the planing stage for this swap, i have a 91 318i with the m42, where do i look up the wiring part?
                B34 or B35? B34 means cutting and converting the wiring. If you have more questions I suggest making your own thread.
                Last edited by wildstoats; 02-17-2010, 06:08 PM.
                $500, Diamantschwarz, and a Dream

                Comment


                  #53
                  i did make my own thread and got no response, the motor is a b35
                  Originally posted by Erick
                  Dude the M30 is stupid simple design. It's 6 manly men inside the block pushing up and down on the cylinder with Hercules-like force.

                  Comment


                    #54
                    Originally posted by funcrew View Post
                    Should be available for a long time on the wayback machine:

                    http://web.archive.org/web/200805030...m30/index.html
                    Anyone save the pictures?

                    Comment


                      #55
                      Guys,

                      I've decided to make my own writeup, which is more comprehensive than the one posted here. It has much more information relative to the electrical system and cooling system woes.

                      So far, it's 45 pages long. It includes schematics, pictures, references to websites, part numbers...etc.

                      It's going to be a *.pdf format and will be mailed via CD.

                      There are so many different ways to skin a cat, so this is the way that I did the swap, so let's not be too critical of a "better" way to do it.

                      I plan to sell a CD of the following:

                      1. E30-M30 swap complete writeup
                      2. *.pdf of actual electonic troubleshooting manual of YOUR model E30
                      3. *.pdf of actual electronic troubleshooting manual of the M30 car from which you are swapping

                      Seems like the demand is there. I'll always be on the forums (and please call if needed) for additional support.

                      Rev - (dash) of the E30-M30 swap CD including all above will cost $10 and can be paid via paypal.

                      I'll publish the announcement by this weekend.
                      Recent Rebranding!!
                      Visit Garageaholic for all of your E30 Swap Needs!
                      E30 SM62/S62
                      E30 M60 V8
                      E30 M30 Big 6!




                      Check out this E36 N54 Swap Build
                      Instagram.com/garageaholic
                      Youtube.com/garageaholic

                      Comment


                        #56
                        sign me up, paypal is loaded. thanks

                        Comment


                          #57
                          I can also post a write up too, from my swap, if interested?
                          Somebody make a sticky dammit!

                          Comment


                            #58
                            Starting New Thread....
                            Recent Rebranding!!
                            Visit Garageaholic for all of your E30 Swap Needs!
                            E30 SM62/S62
                            E30 M60 V8
                            E30 M30 Big 6!




                            Check out this E36 N54 Swap Build
                            Instagram.com/garageaholic
                            Youtube.com/garageaholic

                            Comment


                              #59
                              Bump to the top for n00bs.
                              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                              Comment


                                #60
                                Excellent write-up !!
                                First toutch on the brakes, is a sign of fear :twisted:
                                sigpic

                                Comment

                                Working...
                                X