Raising m42 away from the ground

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ///digitalme
    replied
    what is your suspension???
    im running hr sport oe and it has a huge gap in the front
    along with bilstein sports and i still scrape the oil pan...thats the main reason why i havent put drop hats on my car i need a peerless skid plate i heard nothing but good things from his skid plate

    Leave a comment:


  • nrubenstein
    replied
    Originally posted by T La
    Just busted my pan through an ej night skid today, the thing has no support so when it got hit it just bent up into the bottom of the pan and cracked it...

    so just having a skid won't always save you, now i'm looking to raise the engine and put some type of bar across the unsupported part of the skid to make sure it doesn't bend again
    Peerless skid. I ran into an unexpected construction zone at the unlit bottom of a long hill. Bottomed out the skid plate hard enough that K saw me trailing sparks for a couple hundred feet (she was following).

    No damage. :)

    Leave a comment:


  • T La
    replied
    Just busted my pan through an ej night skid today, the thing has no support so when it got hit it just bent up into the bottom of the pan and cracked it...

    so just having a skid won't always save you, now i'm looking to raise the engine and put some type of bar across the unsupported part of the skid to make sure it doesn't bend again

    Leave a comment:


  • E30SPDFRK
    replied
    First of all, are your mounts in good shape? M42's have weak mounts to start with and a set of new ones could raise you up a good .5-.75 inch from worn ones.


    Second, all you need to space the mounts up is some washers. Make sure you have enough threads that the nuts will still fully engage and it will be just as safe as stock.

    There are problems with spacing them though. The top of the mounts are angled in towards the center of the car. When you space the motor mount up, it will cause the angle that the mounts sit on to go more vertical, putting more stress on the mounts. Also, spacing only the engine mounts will make the engine rotate on the transmission mounts and will put more stress on the guibo. You need to space the transmission mounts up as well so the engine, transmission and front driveshaft angles are the same. You could try spacing the CSB down instead but that's kind of the wrong way to do it.


    So, there's no issues raising it except for other parts wearing out faster.

    Edit: if you still have the factory fan shroud you can run into issues there as well

    Leave a comment:


  • Balleristic31
    replied
    yes it will. You will be less bouncy

    Leave a comment:


  • freeride53
    replied
    Originally posted by Balleristic31
    Did you post that in the wrong thread? lol
    no, just wondering if that should lessen my chances of the car's suspension bouncing enough to bust the pan again.

    Leave a comment:


  • Balleristic31
    replied
    Did you post that in the wrong thread? lol

    Leave a comment:


  • freeride53
    replied
    Oui oui.
    Blunt set me up with a pair of Bilstein Sport struts last week, and I am doing those, as well as E30 M3 CABS tomorrow evening. Currently on the *original* 230,000 miles Stock struts...will I be in for a surprise, or do they feel similar to stock??

    Leave a comment:


  • Balleristic31
    replied
    Originally posted by KenC
    I've seen like one or two break through one of Eric's skidplates. If you hit something hard enough to smash your pan through one of his plates, you're going to need a few new suspension components as well.

    Mine has taken a lot of abuse and is holding up great.
    This

    Although i dont have an ej skidplate myself, ive seen them in person and you would really have to smash that thing break the pan. And unless you take driveways at 40 or try to smash concrete chunks in the road with your skidplate, you should be fine.

    Leave a comment:


  • KenC
    replied
    I've seen like one or two break through one of Eric's skidplates. If you hit something hard enough to smash your pan through one of his plates, you're going to need a few new suspension components as well.

    Mine has taken a lot of abuse and is holding up great.

    Leave a comment:


  • freeride53
    replied
    Originally posted by xwill112x
    you wouldnt HAVE to.. thats what the u-joints in the ds are for. Op, you're not low enough to be worried about this topic lol.
    I've busted two oil pans already, avoiding every crack in the road for the last year or so. don't even get me started. it's caused me so many problems.

    Originally posted by KenC
    You could just put a spacer atop the motormount, but why not just get a skidplate?
    I did buy one. I've seen a lot of people saying that they've busted through the Ej plates, so I'm trying to take precaution.

    Leave a comment:


  • xwill112x
    replied
    Originally posted by tonywonder
    if you space the motor up would you have to space up everything else? so that the drivetrain is all in line?

    you wouldnt HAVE to.. thats what the u-joints in the ds are for. Op, you're not low enough to be worried about this topic lol.

    Leave a comment:


  • tonywonder
    replied
    if you space the motor up would you have to space up everything else? so that the drivetrain is all in line?

    Leave a comment:


  • KenC
    replied
    You could just put a spacer atop the motormount, but why not just get a skidplate?

    Leave a comment:


  • Balleristic31
    replied
    I know the e28 solid mounts work. Idk if that's what ur thinking of.

    Leave a comment:

Working...