Raising m42 away from the ground

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • freeride53
    replied
    I've heard rumors that the (e34?) or some other model's mounts will raise it up..but again, I'm clueless.

    Leave a comment:


  • Dj Buttchug
    replied
    its about 1 to 1.5 inches of clearance from hood to intake top. The only real ghetto ass way to test this is to use the washer method.

    Stack 4 decent sized washers on the top of your motor mount. This will lift it however thick the washers are. Itll give you about 2/3 of a inch more clearance between oil pan and road.

    For those that are low thats a decent margin. One could possibly use a better spacer then washers from ace hardware. a decent machined spacer or even a taller motor mount would be better.

    Leave a comment:


  • Balleristic31
    replied
    The manifold already sits super high in the bay, wouldn't there be clearance issues there? Not to mention possibly messing up the awesome handling characteristics of an m42 car.

    Leave a comment:


  • Dj Buttchug
    replied
    pondered the idea of this for years. FML lol

    Leave a comment:


  • freeride53
    started a topic Raising m42 away from the ground

    Raising m42 away from the ground

    I've heard about this, and briefly looked into it.
    What is required to raise it a bit to gain an extra inch or two of ground clearance? Mounts?

    Cheers!
Working...