what is your suspension???
im running hr sport oe and it has a huge gap in the front
along with bilstein sports and i still scrape the oil pan...thats the main reason why i havent put drop hats on my car i need a peerless skid plate i heard nothing but good things from his skid plate
Raising m42 away from the ground
Collapse
X
-
Peerless skid. I ran into an unexpected construction zone at the unlit bottom of a long hill. Bottomed out the skid plate hard enough that K saw me trailing sparks for a couple hundred feet (she was following).Just busted my pan through an ej night skid today, the thing has no support so when it got hit it just bent up into the bottom of the pan and cracked it...
so just having a skid won't always save you, now i'm looking to raise the engine and put some type of bar across the unsupported part of the skid to make sure it doesn't bend again
No damage. :)Leave a comment:
-
Just busted my pan through an ej night skid today, the thing has no support so when it got hit it just bent up into the bottom of the pan and cracked it...
so just having a skid won't always save you, now i'm looking to raise the engine and put some type of bar across the unsupported part of the skid to make sure it doesn't bend againLeave a comment:
-
First of all, are your mounts in good shape? M42's have weak mounts to start with and a set of new ones could raise you up a good .5-.75 inch from worn ones.
Second, all you need to space the mounts up is some washers. Make sure you have enough threads that the nuts will still fully engage and it will be just as safe as stock.
There are problems with spacing them though. The top of the mounts are angled in towards the center of the car. When you space the motor mount up, it will cause the angle that the mounts sit on to go more vertical, putting more stress on the mounts. Also, spacing only the engine mounts will make the engine rotate on the transmission mounts and will put more stress on the guibo. You need to space the transmission mounts up as well so the engine, transmission and front driveshaft angles are the same. You could try spacing the CSB down instead but that's kind of the wrong way to do it.
So, there's no issues raising it except for other parts wearing out faster.
Edit: if you still have the factory fan shroud you can run into issues there as wellLeave a comment:
-
-
Oui oui.
Blunt set me up with a pair of Bilstein Sport struts last week, and I am doing those, as well as E30 M3 CABS tomorrow evening. Currently on the *original* 230,000 miles Stock struts...will I be in for a surprise, or do they feel similar to stock??Leave a comment:
-
This
Although i dont have an ej skidplate myself, ive seen them in person and you would really have to smash that thing break the pan. And unless you take driveways at 40 or try to smash concrete chunks in the road with your skidplate, you should be fine.
Leave a comment:
-
I've seen like one or two break through one of Eric's skidplates. If you hit something hard enough to smash your pan through one of his plates, you're going to need a few new suspension components as well.
Mine has taken a lot of abuse and is holding up great.Leave a comment:
-
I've busted two oil pans already, avoiding every crack in the road for the last year or so. don't even get me started. it's caused me so many problems.
I did buy one. I've seen a lot of people saying that they've busted through the Ej plates, so I'm trying to take precaution.Leave a comment:
-
-
if you space the motor up would you have to space up everything else? so that the drivetrain is all in line?Leave a comment:
-
You could just put a spacer atop the motormount, but why not just get a skidplate?Leave a comment:
-
I know the e28 solid mounts work. Idk if that's what ur thinking of.Leave a comment:

Leave a comment: