Announcement

Collapse
No announcement yet.

Re: fault code 43

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: fault code 43

    Hey guys i have a 1989 318is euro car with the m42 and im getting code 43, my problem is a bought the peake reseach code reader then found out it does not read euro cars, so i need some help if all possible.

    #2
    fault code 43

    2Nd note when i look up trouble code 1243 is the pulse generator code the peake gives me 2 numbers 43 do i assume that all codes start with 12? Someone must know this

    Comment


      #3
      do i assume that all codes start with 12?
      Yes, except code 1444 which means no faults.

      Comment


        #4
        Ok thanks

        Comment


          #5
          43

          So when i put the reader on first it comes up Fc then i press go and i get FF then press go again and i get 43

          Comment


            #6
            Download the charts from the Peake Research site. It doesn't list an '89 318is but for the '91 318is there is no code 43. Are you sure the 2nd number is a "3" and not a "E"? 4E is for coolant temp sensor.

            Comment


              #7
              Man i feel like a dummy, yes its a 4E

              Comment


                #8
                Originally posted by vpilarrt View Post
                Download the charts from the Peake Research site. It doesn't list an '89 318is but for the '91 318is there is no code 43. Are you sure the 2nd number is a "3" and not a "E"? 4E is for coolant temp sensor.
                Man thanks very much

                Comment


                  #9
                  code 43

                  Hey i bought a new temperture sensor and still getting the 4E code

                  Comment

                  Working...
                  X