M42 fuel injectors

[sketchkid]

Hey guy how in the hell do I get them off the rack I'm trying to take the off to clean or replace but they don't budge I tried in clipping them too should I just have it lol more tugg?


Sent from my iPhone using Tapatalk

[roguetoaster]

Hey guy, u get dem off by pullin hardr.

[fresh_TD]

Someone needs to hit the gym

Sent from my SAMSUNG-SM-N910A using Tapatalk

[bmwman91]

They are off of the lower manifold now, correct? If not, take them off with the manifold because yanking on them to get them out can cause the pintle cap to fall off and go into a cylinder.

If they are just stuck in the fuel rail...like the others said, just keep pulling and twisting. You will also want to replace the o-rings, and when you reinstall them you should use an "o-ring safe" silicone lubricant to slide them in so they don't bind or tear.

[roguetoaster]

^
The voice of reason, hold the snark.

If they're still in the lower manifold you can try prying with two implements from opposing sides while standing on a board passed between two runners to keep the manifold steady. Same method can work on the rail side minus the board.

[Dust2glory]

I am assuming you took the retention clips off the tops....

[Reub_e30]

We hope.....

[sketchkid]

Lol yes I did take them off. I'm try again later this week


Sent from my iPhone using Tapatalk