Ebay Clutch, 4 Questions.

[6gen91]

Is this a good clutch first of all?
Will it fit on my 2.5 block/trans?
And is it for the dual mass flywheel?
Will i need a different pressure plate?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150485831866&ssPageName=STRK:MEWAX:IT

[e34john]

Nobody on here will recommend that clutch. Get the Sachs kit for like 250 that has the throwout bearing and pressure plate and be done.

[e34john]

Just checked the rest of his stuff, he has the Sachs kit for around 200.

[6gen91]

what exactly is wrong with that clutch?

what about this one?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110586388016&viewitem=&sspagename=STRK%3AMEWAX%3AIT

[CabbE30]

what exactly is wrong with that clutch?

what about this one?
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

I got one of these with my gripforce clutch kit when i did my 5 speed swap. No complaints. No slipping or anything so far after 3k miles. Everyone says my clutch is grabby or firm but thats the pressure plate/ their lack of driving ability.

[DaveSmed]

Why do people always want to over-clutch their cars?

I have probably double the power of your car going through a stock clutch. That is pushing things a bit, but no problems with grip at all.

[F34R]

Grip force makes a good clutch, my friend is running one on his M50 swap with no issues. I personally bought the Sachs.

You can get the whole sachs clutch kit for 140 shipped off ebay from a power seller on there.

PM White325is on here, he knows the seller.

[B3M2W5]

The F1 clutch isnt bad i ran it on my M50 cuz i got a disc free.
Rec saches but the 6 puck does the job never had any sliping.
The only thing i would say negative is that the pucks are thiner and will wear a grove that is smaller then the stock clutch in the flywheel.