Clutch was replaced like 30K ago, I didnt feel it slipping every up until this point. The car is my sisters, so its at my parents house right now, I'm going over there after work to drop the tranny and take a look. I have done 3 clutches on the e30 now, so hopefully it will go pretty smoothly....until we find out whats wrong
no power to driveshaft
Collapse
X
-
perhaps the pressure plate shat itself ?
any weird noises at all?
if 2 rear wheels are in the air (neutral and e-brake dis-engaged) and you turn the driveshaft do the wheels turn? I/e. is your driveshaft/diff/halfshafts functioning?OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
Comment
-
yes, the diff is functioning, its an open diff, so only one wheel was in the air, but it was moving when I spun the driveshaft (car was in gear too so thats the tranny problem) and vice versa...moved the wheels and driveshaft spun1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?Comment
-
I'm very interested in what issue you find is the cause. From reading this post I'm thinking my situation is very similar. I haven't yet been able to take my car off stands to see if my gears will engage but same as you I can pretty much go through shifting each gear too easily like if I have the clutch pressed in when it's not and I don't think it was like that before. I'll really appreciate it if you share and post what you find out. Good luck and I hope it's something simple & quick fix!Comment
-
well I got tickets to the patriots game tonight, so we can rule out any work on the e30, and I will be gone all weekend for the holiday, but I will let you know what happens next week, hopefully the clutch is fine and the transmission took a dump....lot cheaper to pick up a used tranny than a new clutch kit.1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?Comment
-
welll, theres a new development, I took the starter off so I could get a look at the flywheel. The flywheel does not spin when the driveshaft does, so I do not think the clutch is the problem, it must be an internal transmission problem correct?1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?Comment
Comment