Announcement

Collapse
No announcement yet.

e36 trans fitment on e30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e36 trans fitment on e30

    will the manual e36 m3 transmission fit my e30 325is ? my e30 is auto im switching to manual.

    the e36m3 trans was used on other bmws non-m too right ? 528i and z3

    what else would i need to switch, besides the transmission.
    Last edited by helalo; 03-15-2016, 05:48 PM.

    #2
    ZF 310/20 was used on 2.8l cars also the m3s. Should bolt up to yours.

    Comment


      #3
      Yes and no, the zf will be clocked 10 degrees, so you'll needs custom trans brace and twist the shift linkage. Like the opposite when people pair the G260 with the 24v engines.
      My Garage
      2001 Z3 2.5i Steel Gray/Black (Lexi)
      1988 325ix Diamond Schwartz/Black (Izzy)
      1989 325i Cirrus Blue/Houndstooth (Stitch)
      Feedback

      Instagram: Stone.Hopkins

      Comment


        #4
        so its a better option to do a manual swap when i do the engine swap than fitting a zf to a stock 325is.

        im not mechanically knowledgeable but a custom trans brace and twisting a shift linkage sounds uneasy to get/do when i ask my uncles shop to do it.

        Comment

        Working...
        X