it is true that lightweight flys make a similar noise but its more likely that its just the input shaft bearing/gear noise
either way its nothing to worry about theres really nothing to do about short of rebuilding the tranny
Chackita-chackita-chackita-chackita
Collapse
X
-
The rattling is just gearbox rattle from a lighweight flywheel which you probably have, or maybe the i has a light enough flywheel to cause gearbox rattle, can't say for sure there, never been in an i for long enough to notice.
The screeching noise is another matter though, probably the TO bearing.Leave a comment:
-
the chakita sound is just his input shaft bearing making noise its not a serious problem its just annoying, its a very common problemLeave a comment:
-
it's broken!
seriously though NOTHING should sound like "chakita-chakiblah blah blah"
or "zzzzsszzz" sounds like its time to drain the oil into a CLEAN pan and look for metal/debris. cuz somethings on its way out
Leave a comment:
-
how olds your clutch?
could be the clutch isnt disengaging correctly and your grinding gears when shiftingLeave a comment:
-
Chackita-chackita-chackita-chackita
That's the sound my E30 has always made when the clutch is out in neutral. Never caused any problems. Been like that ever since I've owned it, as well as the previous owner. In fact, my old red E30 would make it just a little bit when I turned off the car. Whenever I rev up the car (past 1k) the sound goes away.
However, today it made a new noise. Aside from the chackita-chackita-chackita-chackita when the clutch is out, when I push the clutch in, about a second later an almost grinding noise happens. Like almost a zzzzzzzzzssszzzzzzzzzzzzzzzzzzz like something is rubbing/grinding. It's not a whine, it still sounds like the chackita-chackita-chackita-chackita, just not so "choppy," per se, but a little more steady. Almost like a big rig grinding gears, but not so grind-y. It'll speed up with engine speed until the clutch mates with the flywheel, and it will totally disappear until I hit the clutch again.
Aside from that, the car drives just like it should. No problems shifting, engaging/disengaging, driving, unsw. No slippage, chattering.
I live in Greenville, NC. The weather has been fluctuating between hot and cold rather frequently.
I think it's the synchros getting old. I read somewhere on here that the chackita-chackita-chackita-chackita are my synchros clackin' away, waiting to be used. I just hope it isn't what I think it is...
Edit: The chackita-chackita-chackita-chackita can also be compared with marbles rolling around. I honestly still think it might be a worn input shaft?
Ninja Edit: Should I change the gear oil? I don't know if its been changed, and the ODO has 232,802 on it. Would changing it fuck it up? Should I use redline?Last edited by llll1l1ll; 01-23-2007, 07:31 PM.Tags: None

Leave a comment: